How To Repair Tpms Sensor Chevy Captiva Sport

How to Reset Chevy Captiva TPMS Low Tire Force per unit area Lite (2012-2018)

How to Reset Chevy Captiva TPMS Low Tire Pressure Low-cal (2012-2018) – The Chevrolet Captiva is an SUV Segment D, produced by former Korean manufacturer Daewoo, and marketed worldwide under the Chevrolet brand after the acquisition of Daewoo by General Motors. His line is borrowed from the Chevrolet S3X prototype, presented in 2004, the last of the acquisition phase of the Korean manufacturer past GM. Yet, in Korea, it has been marketed under the Daewoo brand until 2011 under the name of Daewoo Windstorm, when, in addition to 'arrival of the facelift, the Daewoo make in Korea, is replaced with the global Chevrolet brand.

It is also sold past GM'southward Australian subsidiary Holden as Holden Captiva. The Captiva is equipped with two petrol units and one diesel fuel. The two gasoline is a 4 cylinder in-line 2405cm³ able to develop 136cv, and a six-cylinder V 3195 cm³ able to develop 227 hp. The diesel before the makeover is designed in partnership with the Italian VM Motori, but produced in South Korea and is a 4-cylinder in-line 1991 cc, capable of 150 hp.

How to Reset Chevy Captiva TPMS Low Tire Pressure Lite (2012-2018):

Time needed:17 minutes.

To relearn or reset the Tire Pressure Monitoring System (TPMS) sensor on your 2012 2013 2014 2015 2016 2017 2018 Chevy Captiva you must have aTPMS relearn tool and follow these steps:

1. Stop the vehicle in a safe place and turn the engine switch off and engage the parking brake.
2. Turn the ignition to the ON position without starting the engine.
3. Printing and hold unlock and lock buttons on the Remote Keyless Entry (RKE) transmitter until horn sounds
4. If your vehicle does not have the Remote Keyless Entry (RKE) transmitter

   Printing the DICBill of fare button
   Curlicue up and select"Tire Pressure Menu"
   Printing theFix/CLR button
   When a message requesting acceptance of the process appears, printing theFix/CLR push again to confirm.
   The horn sounds twice to indicate the receiver is in relearn fashion

5. Starting from the driver's side front tire, place therelearn tool against the tire sidewall, almost the valve stalk. And then printing the button to activate the TPMS sensor.
6. Repeat the procedure on the correct-front tire, the correct rear tire, and the last i left rear tire.
7. A horn chirp confirms that the sensor identification code has been matched to this tire and wheel position.
8. Turn the ignition off and start the engine to verify the indicator has been reset.

For more details, please watch the post-obit video:

This tutorial is based on the Chevrolet owner's manual. This process should be work on the latest generation of Chevy Captiva (2012 2013 2014 2015 2016 2017 2018 model years). Hopefully, the commodity How to Reset Chevy Captiva TPMS Low Tire Pressure Lite (2012-2018)useful for you. Adept Luck!

Source: https://enginepartsdiagram.com/how-to-reset-chevy-captiva-tpms-low-tire-pressure-light-2012-2018/

Posted by: wilsonhimattim.blogspot.com

Share this post